A loaded bulk carrier departed on an eastbound Atlantic crossing in winter. Four days into the voyage and with the weather deteriorating, heavy seas were coming on board. The Master required that the Spurling pipes be secured with cement, so the bosun and four crew members proceeded forward for the task. The vessel’s speed was not reduced prior to the task nor was the safety management manual consulted. No toolbox meeting was held before the crew went forward. As the men were working at the Spurling pipes, the ship encountered a large wave that broke over the bow and violently washed the men off their feet, dashing them into the ship’s structure. One crew member suffered a serious head wound and the bosun was incapacitated. The victims were assisted back to the accommodation where the victim with the head wound was attended to. He was placed in the ship’s hospital but quickly lapsed into unconsciousness and was placed on oxygen. The Master diverted to the nearest port, which was 24 hours away. On arrival, the victim was rushed to the hospital but was declared deceased on arrival. The bosun, whose mobility was seriously impaired, was repatriated, as were the other three crew lesser injuries. Port state control officers boarded the ship and took statements from the Master and some crew members. The safety management manual did not contain a ‘Going on deck during bad weather’ checklist, which was nonetheless a moot point because the SMS was not even consulted before the task. Lessons learned The time-honoured practices of ‘Securing for sea’ should be observed, particularly when embarking on an ocean crossing in winter. One of the best practices in this endeavour is ensuring the spurling pipe covers are placed, secured and cemented prior to departure. Safety management manuals should contain guidance for all known risks and should be consulted as a matter of course – but so too should common sense be used before undertaking tasks. Slowing the ship and changing course so waves are not breaking over the bow where the crew are working seems an obvious course of action, but was not taken in this instance. A toolbox meeting, held before a potentially hazardous operation is undertaken, can help reduce risks through input received from all team members taking part. Disclaimer : The information on this website is for general purposes only. While efforts are made to ensure accuracy, we make no warranties of any kind regarding completeness, reliability, or suitability. Any reliance you place on such information is at your own risk. We are not liable for any loss or damage arising from the use of this website. Related Posts Real Life Incident: Collision Of Container Ship and General Cargo Ship Leads To Sinking And Fatalities Real Life Incident: Collision and Sinking of Small Craft in Shipping Lane Real Life Incident: Crew Saved but Ship Lost Real Life Incident: Pin Holes Create Pathway To Fatal Reckoning Related Posts Real Life Incident: Collision Of Container Ship and General Cargo Ship Leads To Sinking And Fatalities Real Life Incident: Collision and Sinking of Small Craft in Shipping Lane Real Life Incident: Crew Saved but Ship Lost Disclaimer : The information on this website is for general purposes only. While efforts are made to ensure accuracy, we make no warranties of any kind regarding completeness, reliability, or suitability. Any reliance you place on such information is at your own risk. We are not liable for any loss or damage arising fro