BRITANNIA LOSS PREVENTION AUGUST 2025 OUR LOSS PREVENTION TEAM REGULARLY RECEIVES ENQUIRIES RELATING TO THE ACTIONS TO TAKE WHEN LOADING DIFFERENT BULK CARGOES TO MEET THE REQUIREMENTS OF THE INTERNATIONAL MARITIME SOLID BULK CARGOES (IMSBC) CODE. The shipper is responsible for providing sufficient information to the master (or their representative) in advance to allow preparations to be made for safe loading, stowage, and carriage of the nominated cargo. The IMSBC Code describes the information that should be supplied by the shipper in Section 4.2.2, and this information should be supplied along with a declaration (example format provided in Section 4.2.3). Arguably the most important piece of information to be provided is the “Bulk Cargo Shipping Name” (BCSN). Once the BCSN has been provided, it is generally a straightforward case of identifying the appropriate schedule contained in Appendix 1 for the cargo presented for carriage and confirming that any requirements for safe carriage can be complied with. It is also common for ships that are engaged in the carriage of bulk cargoes to have obtained a Statement of Compliance or similar from their Classification Society indicating the BCSN of cargoes that can be carried, along with any additional conditions as required. However, difficulty arises when the name of the cargo supplied does not match any of the BCSN listed within the schedules of the IMSBC Code. When this happens, the schedules contained in the IMSBC Code cannot be used directly and alternative steps must be taken to confirm the safety of the cargo to be carried. There are some quick confirmatory checks that can be made should this occur. IMSBC CODE 2 | BRITANNIA LOSS PREVENTION | GUIDANCE When provided with a BCSN that does not appear within Appendix 1, check if the same name is being referenced in Appendix 4. It is possible that a synonym has been used, for example a cargo declared as “Chrome Ore” directs the user to review the schedule under a BCSN of “CHROMITE ORE”. This only provides the master and crew with the correct references they require to understand the characteristics of the cargo sufficiently in advance of loading to enable the precautions which may be necessary for proper stowage and safe carriage of the cargo to be put into effect. However, it still does not fulfil the requirement of Section 4.1.3 and Section 4.2 of the Code, if such a circumstance does occur, we recommend that clarification is sought from the shipper, and ultimately the correct BCSN should be inserted in the cargo declaration and not the synonym. It is also recommended to compare the cargo with the description and characteristics described within the individual schedule, and should notable differences be found, contact the Club for further advice. CHECK FOR SYNONYMS Some BCSNs have been grouped under a single schedule. A good example is the schedule for “Mineral concentrates”, which contains the information required for 25 different BCSNs. CHECK FOR GROUPINGS It may be that the BCSN has been provided in a language different from that which is expected. Appendix 5 provides BCSNs translated into three different languages: English, French, and Spanish. If, however, the name of the cargo cannot be conclusively matched to a BCSN listed in the IMSBC Code, then the standalone procedure in Section 1.3 – “Cargoes not listed in this Code” shall be followed. In the first instance, the shipper must supply the required information on the cargo’s charact